CuZn35Mn2Al1Fe1-C CC765S - EN 1982-2017

Grade	CuZn35Mn2Al1Fe1-C
European Standard Steel Grade	CC765S
Corresponding Standard	EN 1982-2017 Copper and Copper Alloys – Ingots and Castings
Classification	Copper and Copper Alloys

CuZn35Mn2Al1Fe1-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn ^①	P	Ni	Cu ^②	Pb	Al	Sn	Sb	More
铸件	Minimum Value	0.5	-	0.5	-	-	57	-	0.5	-	-	Zn:余量
铸件	Maximum Value	2	0.1	3	0.03	6	65	0.5	2.5	1	0.08	Zn:余量

CuZn35Mn2Al1Fe1-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥450	≥170	≥20	≥110
Casting	Permanent Mold Casting GM	≥475	≥200	≥18	≥110
Casting	Centrifugal Casting GZ	≥500	≥200	≥18	≥120
Casting	Continuous Casting GC	≥500	≥200	≥18	≥120

Approximate Comparison Table Copper and Copper Alloy

CuZn35Mn2Al1Fe1-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!