CuFe2P CW107C - EN 1654-1998

Grade	CuFe2P
European Standard Steel Grade	CW107C
Corresponding Standard	EN 1654-1998 Copper and copper alloys - Strip for springs and connectors
Classification	Copper and Copper Alloys
Density	8.8 g/cm³

CuFe2P Chemical Element Composition Content (%)

Component	Fe	P	Pb	Zn	Other Total	More
Minimum Value	2.1	0.015	-	0.05	-	Cu: 余量
Maximum Value	2.6	0.15	0.03	0.2	0.2	Cu: 余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuFe2P Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Strip	CuFe2P-R340	R340	340~390	≥(240)	≥8ⓐ ；≥10ⓑ
Strip	CuFe2P-H100	H100				HV: 100~120
Strip	CuFe2P-R370	R370	370~430	≥(330)	≥4ⓐ ；≥6ⓑ
Strip	CuFe2P-H120	H120				HV: 120~140
Strip	CuFe2P-R420	R420	420~480	≥(380)	≥3ⓑ
Strip	CuFe2P-H130	H130				HV: 130~150
Strip	CuFe2P-R470	R470	≥470	≥(440)
Strip	CuFe2P-H140	H140				HV: ≥140

CuFe2P Corresponding Standards(Same grade name, different standards)

1	EN 1654-1998
	CuFe2P CW107C
2	EN 12166-2016
	CuFe2P CW107C
3	DIN EN 12166-2016
	CuFe2P CW107C
4	DIN 17666-1983
	CuFe2P 2.1310
5	DIN EN 12449-2019
	CuFe2P CW107C
6	EN 12449-2023
	CuFe2P CW107C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!