CuSn11P-C CC481K - EN 1982-2017

Grade	CuSn11P-C
European Standard Steel Grade	CC481K
Corresponding Standard	EN 1982-2017 Copper and Copper Alloys – Ingots and Castings
Classification	Copper and Copper Alloys

CuSn11P-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	P ^①	S	Ni	Cu	Pb	Al	Zn	Sn	Sb
铸件	Minimum Value	-	-	-	0.5	-	-	87	-	-	-	10	-
铸件	Maximum Value	0.1	0.01	0.05	1	0.05	0.1	89.5	0.25	0.01	0.05	11.5	0.05

CuSn11P-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥250	≥130	≥5	≥60
Casting	Permanent Mold Casting GM	≥310	≥170	≥2	≥85
Casting	Continuous Casting GC	≥350	≥170	≥5	≥85
Casting	Centrifugal Casting GZ	≥330	≥170	≥4	≥85

1 Approximate Comparison Table Cast tin bronze

China	United States	International Organization for Standardization		France	European Standard		Russia
GB	UNS	ISO	Numerical Grade	NF EN/NF	EN	Numerical Grade	GOST
ZCuSn10P1	C90710	GCuSn10P1	C90710	U-E10PY300 C90710	CuSn11P-C	CC481K	БрО10Ф1Л

2 Approximate Comparison Table Copper and Copper Alloy

International Organization for Standardization	Germany	European Standard		Russia	United Kingdom
ISO	DIN EN/DIN	EN	Numerical Grade	GOST	BS EN/BS
CuSn10P	CuSn10P	CuSn11P-C	CC481K	BrO10F1	PB1

CuSn11P-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!