CuSn11P-C CC481K - DIN EN 1982-2017

Grade	CuSn11P-C
Germany W-Nr.	CC481K
Corresponding Standard	DIN EN 1982-2017 Copper and Copper Alloys – Ingots and Castings
Classification	Copper and Copper Alloys

CuSn11P-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	P ^①	S	Ni	Cu	Pb	Al	Zn	Sn	Sb
铸件	Minimum Value	-	-	-	0.5	-	-	87	-	-	-	10	-
铸件	Maximum Value	0.1	0.01	0.05	1	0.05	0.1	89.5	0.25	0.01	0.05	11.5	0.05

CuSn11P-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥250	≥130	≥5	≥60
Casting	Permanent Mold Casting GM	≥310	≥170	≥2	≥85
Casting	Continuous Casting GC	≥350	≥170	≥5	≥85
Casting	Centrifugal Casting GZ	≥330	≥170	≥4	≥85

CuSn11P-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!