CuSn12-C CC483K - DIN EN 1982-2017

Grade	CuSn12-C
Germany W-Nr.	CC483K
Corresponding Standard	DIN EN 1982-2017 Copper and copper alloys – Ingots and castings
Classification	Copper and Copper Alloys

CuSn12-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	P	S	Ni	Cu ^①	Pb	Al	Zn	Sn ^①	Sb
铸件	Minimum Value	-	-	-	-	-	-	85	-	-	-	11	-
铸件	Maximum Value	0.2	0.01	0.2	0.6	0.05	2	88.5	0.7	0.01	0.5	13	0.15

CuSn12-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥260	≥140	≥7	≥80
Casting	Permanent Mold Casting GM	≥270	≥150	≥5	≥80
Casting	Continuous Casting GC	≥300	≥150	≥5	≥90
Casting	Centrifugal Casting GZ	≥280	≥150	≥5	≥90

New and Old Grade Replacement List

CuSn12-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!