CuSn5Zn5Pb2-C CC499K - DIN EN 1982-2017

Grade	CuSn5Zn5Pb2-C
Germany W-Nr.	CC499K
Corresponding Standard	DIN EN 1982-2017 Copper and copper alloys – Ingots and castings
Classification	Copper and Copper Alloys

CuSn5Zn5Pb2-C Chemical Element Composition Content (%)

	Component	Fe	Si	P	S	Cr	Ni	Cu	As	Pb	Al	Zn	Sn	Bi	Sb	Cd
铸件	Minimum Value	-	-	-	-	-	0.1	84	-	0.2	-	4	4	-	-	-
铸件	Maximum Value	0.03	0.01	0.04	0.04	0.02	0.6	88	0.02	3	0.01	6	6	0.02	0.1	0.02

	Component	Sb
	Minimum Value	-
	Maximum Value	0.1

CuSn5Zn5Pb2-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥200	≥90	≥13	≥60
Casting	Permanent Mold Casting GM	≥220	≥110	≥6	≥65
Casting	Centrifugal Casting GZ	≥250	≥110	≥13	≥65
Casting	Continuous Casting GC	≥250	≥110	≥13	≥65

CuSn5Zn5Pb2-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!