S21800 - ASTM A479/A479M-2018

USA UNS	S21800
Corresponding Standard	ASTM A479/A479M-2018 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Classification	Austenitic Stainless Steel

Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	3.5	7	-	-	16	8	0.08
Maximum Value	0.1	4.5	9	0.06	0.03	18	9	0.18

◎ New designations established in accordance with Practice E527 and SAE J1086 published jointly by ASTM and SAE. See ASTM DS-56C, available from ASTM Headquarters.

Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
All specifications	Annealing	≥655	≥345	in 2 in.[50 mm] or 4D ≥ 35	≥ 55 ①	≤241

◎ d-diameter, t-thickness

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!