S35315 - ASTM A479/A479M-2018

USA UNS	S35315
Corresponding Standard	ASTM A479/A479M-2018 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Classification	Austenitic Stainless Steel

Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N	Ce
Minimum Value	0.04	1.2	-	-	-	24	34	0.12	0.03
Maximum Value	0.08	2	2	0.04	0.03	26	36	0.18	0.08

◎ New designations established in accordance with Practice E527 and SAE J1086 published jointly by ASTM and SAE. See ASTM DS-56C, available from ASTM Headquarters.

Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
All specifications	Annealing	≥650	≥270	in 2 in.[50 mm] or 4D ≥ 40

◎ d-diameter, t-thickness

Approximate Comparison Table Austenitic Stainless Steel

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	EN	Numerical Grade
S35315	X6NiCrSiNCe35-25	4854-353-15-E	X6NiCrSiNCe35-25	1.4854

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!