Grade CuZn30
European Standard Steel Grade CW505L
Corresponding Standard EN 1654-1998
Copper and copper alloys - Strip for springs and connectors
Classification Copper and Copper Alloys
Density 8.5 g/cm3
CuZn30 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 69 - - - - Zn:余量
Maximum Value 0.05 0.3 71 0.05 0.02 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn30 Mechanical Properties
condition Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Strip CuZn30-R350 R350 350~430 ≥(170) ≥21ⓐ ;≥25ⓑ
Strip CuZn30-H095 H095 HV: 95~125
Strip CuZn30-R410 R410 410~490 ≥9ⓐ ;≥12ⓑ
Strip CuZn30-H120 H120 HV: 120~155
Strip CuZn30-Y350 Y350 350~(440) ≥9ⓐ ;≥12ⓑ
Strip CuZn30-R480 R480 480~560 ≥4ⓐ ;≥6ⓑ
Strip CuZn30-H150 H150 HV: 150~180
Strip CuZn30-Y460 Y460 460~(540) ≥4ⓐ ;≥6ⓑ
Strip CuZn30-R550 R550 550~640 ≥2ⓑ
Strip CuZn30-H170 H170 HV: 170~200
Strip CuZn30-Y530 Y530 530~(620) ≥2ⓑ
Strip CuZn30-R630 R630 ≥630
Strip CuZn30-H190 H190 HV: ≥190
Strip CuZn30-Y610 Y610 ≥610
1 Approximate Comparison Table Brass
China Japan United States International Organization for Standardization Germany European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
H70 C2600 70Cu-30Zn C26000 CuZn30 C26000 CuZn30 C26000
2.0265
CuZn30 CW505L Л70
2 Approximate Comparison Table Copper and Copper Alloy
Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
C2600 C26000 CuZn30 CuZn30 2.0265 CuZn30 CuZn30 CW505L L70 CuZn30 CZ106

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!