S41400 - ASTM A479/A479M-2018

USA UNS	S41400
ASTM Specification or Grade	414
Corresponding Standard	ASTM A479/A479M-2018 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Classification	Martensitic Stainless Steel

Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	-	-	-	-	-	11.5	1.25
Maximum Value	0.15	1	1	0.04	0.03	13.5	2.5

◎ New designations established in accordance with Practice E527 and SAE J1086 published jointly by ASTM and SAE. See ASTM DS-56C, available from ASTM Headquarters.

Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
All specifications	Tempering	≥795	≥620	in 2 in.[50 mm] or 4D ≥ 15	≥ 45 ①	≤321

◎ d-diameter, t-thickness

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!