Grade ZAlSi7Mg
ZL101
Corresponding Standard HB 962-2001
Aluminum alloy Casting
Classification Aluminum and Aluminum Alloys
ZAlSi7Mg Chemical Element Composition Content (%)
  Component Fe * Si Mn * Cu * Ti * Pb * Zn * Sn * Mg Other Individual Other Total More
S,R Minimum Value - 6.5 - - - - - - 0.2 - - AI:余量
Ti+Zr≤0.15
Maximum Value 0.5 7.5 0.5 0.2 0.15 0.05 0.3 0.01 0.4 0.05 0.15
  Component Fe * Si Mn * Cu * Ti * Pb * Zn * Sn * Mg Other Individual Other Total More
J Minimum Value - 6.5 - - - - - - 0.2 - - AI:余量
Ti+Zr≤0.15
Maximum Value 0.9 7.5 0.5 0.2 0.15 0.05 0.3 0.01 0.4 0.05 0.15
  Component Fe * Si Mn * Cu * Ti * Pb * Zn * Sn * Mg Other Individual Other Total More
Y Minimum Value - 6.5 - - - - - - 0.2 - - AI:余量
Ti+Zr≤0.15
Maximum Value 1.5 7.5 0.5 0.2 0.15 0.05 0.3 0.01 0.4 0.05 0.15
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
① When the alloy is used for die casting, a “Y” is allowed after the alloy designation
② Premium alloy with the letter \"A\" after the number
ZAlSi7Mg Mechanical Properties
product Heat Treatment or Condition
Tensile Strength
σb
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
S,R,J Casting State (F) ≥160 ≥2 HBS: ≥50
S,R,J Annealed (T2) ≥140 ≥2 HBS: ≥45
S,R Solution Heat Treatment + Natural Aging (T4) ≥180 ≥4 HBS: ≥50
J Solution Heat Treatment + Natural Aging (T4) ≥190 ≥4 HBS: ≥50
S,R Solution Treatment + Incomplete Artificial Aging (T5) ≥200 ≥2 HBS: ≥60
J Solution Treatment + Incomplete Artificial Aging (T5) ≥210 ≥2 HBS: ≥60
SB,RB Solution Treatment + Full Artificial Aging (T6) ≥230 ≥1 HBS: ≥70
SB,RB Solid Solution Treatment + Stabilization Treatment (T7) ≥200 ≥2 HBS: ≥60
SB,RB Solution heat treatment + softening treatment (T8) ≥160 ≥3 HBS: ≥55
ZAlSi7Mg Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!