ZAlSi5Cu1Mg ZL105 - HB 962-2001

Grade	ZAlSi5Cu1Mg
	ZL105
Corresponding Standard	HB 962-2001 Aluminum alloy Casting
Classification	Aluminum and Aluminum Alloys

ZAlSi5Cu1Mg Chemical Element Composition Content (%)

	Component	Fe ^*	Si	Mn ^*	Cu	Ti ^*	Pb ^*	Zn ^*	Sn ^*	Mg	Other Individual	Other Total	More
S,R	Minimum Value	-	4.5	-	1	-	-	-	-	0.4	-	-	Al: Remainder Ti+Zr≤0.15
S,R	Maximum Value	0.6	5.5	0.5	1.5	0.15	0.05	0.3	0.01	0.6	0.05	0.15	Al: Remainder Ti+Zr≤0.15

	Component	Fe ^*	Si	Mn ^*	Cu	Ti ^*	Pb ^*	Zn ^*	Sn ^*	Mg	Other Individual	Other Total	More
J	Minimum Value	-	4.5	-	1	-	-	-	-	0.4	-	-	Al: Remainder Ti+Zr≤0.15
J	Maximum Value	1	5.5	0.5	1.5	0.15	0.05	0.3	0.01	0.6	0.05	0.15	Al: Remainder Ti+Zr≤0.15

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

① When the alloy is used for die casting, a “Y” is allowed after the alloy designation
② Premium alloy with the letter \"A\" after the number

* Allowable impurity elements content

ZAlSi5Cu1Mg Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
S,J	Artificial Aging (T1)	≥160	-	HBS: ≥65
S,R	solution and Partial artificial aged (T5)	≥230	≥1	HBS: ≥70
J	solution and Partial artificial aged (T5)	≥250	≥1	HBS: ≥70
S,R,J	solution and stabilized (T7)	≥200	≥1	HBS: ≥65

ZAlSi5Cu1Mg Corresponding Standards(Same grade name, different standards)

1	GB /T 1173-2013
	ZAlSi5Cu1Mg ZL105
2	HB 962-2001
	ZAlSi5Cu1Mg ZL105

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!