ZAlSi7Mg1A ZL114A - HB 962-2001

Grade	ZAlSi7Mg1A
	ZL114A
Corresponding Standard	HB 962-2001 Aluminum Alloy Casting
Classification	Aluminum and Aluminum Alloys

ZAlSi7Mg1A Chemical Element Composition Content (%)

	Component	Fe ^*	Si	Be ^*	Mn ^*	Cu ^*	Ti	Zn ^*	Mg	Other Individual	Other Total	More
J-Metal mold casting	Minimum Value	-	6.5	-	-	-	0.08	-	0.45	-	-	Al: Remainder
J-Metal mold casting	Maximum Value	0.2	7.5	0.07	0.1	0.1	0.25	0.1	0.75	0.05	0.15	Al: Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

① When the alloy is used for die casting, a “Y” is allowed after the alloy designation
② Premium alloy with the letter \"A\" after the number

* Allowable impurity content

ZAlSi7Mg1A Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
Metal Mold Castings	Solution Treatment + Full Artificial Aging (T6)	≥300①	≥4	HBS: ≥80

ZAlSi7Mg1A Corresponding Standards(Same grade name, different standards)

1	GB /T 1173-2013
	ZAlSi7Mg1A ZL114A
2	HB 962-2001
	ZAlSi7Mg1A ZL114A

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!