ZAlCu5MnA ZL201A - HB 962-2001

Grade	ZAlCu5MnA
	ZL201A
Corresponding Standard	HB 962-2001 Aluminum alloy Casting
Classification	Aluminum and Aluminum Alloys

ZAlCu5MnA Chemical Element Composition Content (%)

	Component	Fe ^*	Si ^*	Mn	Ni ^*	Cu	Ti	Zr ^*	Zn ^*	Mg ^*	Other Individual	Other Total	More
S,R	Minimum Value	-	-	0.6	-	4.8	0.15	-	-	-	-	-	AI:余量
S,R	Maximum Value	0.15	0.1	1	0.05	5.3	0.35	0.15	0.1	0.05	0.05	0.1	AI:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

① When the alloy is used for die casting, a “Y” is allowed after the alloy designation
② Premium alloy with the letter \"A\" after the number

ZAlCu5MnA Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
S,R	Solution Treatment + Incomplete Artificial Aging (T5)	≥390	≥8	HBS: ≥100

ZAlCu5MnA Corresponding Standards(Same grade name, different standards)

1	GB /T 1173-2013
	ZAlCu5MnA ZL201A
2	HB 962-2001
	ZAlCu5MnA ZL201A

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!