Z7CN18-09 - NF A 35-573-1990

Grade	Z7CN18-09
Corresponding Standard	NF A 35-573-1990 Stainless steels for general purposes - Plates, wide strips and strips
Classification	Austenitic Stainless Steel

Z7CN18-09 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	-	-	-	-	-	17	8
Maximum Value	0.07	0.75	2	0.04	0.015	19	10

Z7CN18-09 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Steel plate:	Solid Solution Treatment	520~720	≥210	≥45	≥45	≤215	90

Approximate Comparison Table Austenitic Stainless Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!