CuAl10Fe3Mn2 CW306G - EN 12163-1998

Grade	CuAl10Fe3Mn2
European Standard Steel Grade	CW306G
Corresponding Standard	EN 12163-1998
Classification	Copper and Copper Alloys
Density	7.6 g/cm³

CuAl10Fe3Mn2 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Ni	Pb	Al	Zn	Sn	Other Total	More
Minimum Value	2	-	1.5	-	-	9	-	-	-	Cu:余量
Maximum Value	4	0.2	3.5	1	0.05	11	0.5	0.1	0.2	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuAl10Fe3Mn2 Mechanical Properties

diameter/width across-flats d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
10<d≤80	CuAl10Fe3Mn2-R590	R590	≥590	≈330*	≥12(A)
10<d≤80	CuAl10Fe3Mn2-H140	H140				HB: 140~180； HV: 145~185
10<d≤50	CuAl10Fe3Mn2-R690	R690	≥690	≈510*	≥6(A)
10<d≤50	CuAl10Fe3Mn2-H170	H170				HB: ≥170； HV: ≥180
10<d≤80	CuAl10Fe3Mn2-M	M	No specification	No specification	No specification	No specification

① Material condition names and designations:
H - Hardness (Brinell hardness or Vickers hardness), with the suffix number indicating the hardness value.
R - Tensile strength, with the suffix number indicating the minimum tensile strength value.
M - Manufactured without specified mechanical properties. Refer to standard EN 1173-2008.
② A100, A11.3, A - Gauge length.

1 Approximate Comparison Table bronze

China		Japan	United States		International Organization for Standardization		Germany		European Standard		Russia
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade	GOST
QAl10-3-1.5	T61760	C6161 C61600	85Cu-10Al-3Fe-2Mn	C61600	CuAl10Fe3Mn2	C61600	CuAl10Fe3Mn2	2.0936 C61600	CuAl10Fe3Mn2	CW306G	БрАЖМц10-3-1.5

2 Approximate Comparison Table Cupper and cupper alloy

International Organization for Standardization	Germany		European Standard		Russia
ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade	GOST
CuAl10Fe3	CuAl10Fe3Mn2	2.0936	CuAl10Fe3Mn2	CW306G	BrAZHMts10-3-1.5

CuAl10Fe3Mn2 Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	CuAl10Fe3Mn2 CW306G
2	DIN 17672-1-1983
	CuAl10Fe3Mn2 2.0936 (CuAl10Fe)
3	DIN EN 12163-1998
	CuAl10Fe3Mn2 CW306G (2.0936)
4	DIN 17671-1-1983
	CuAl10Fe3Mn2 2.0936 (CuAl10Fe)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!