ZP0430 ZP2 - NF EN 12844-1999

Grade	ZP0430
Other Names
Corresponding Standard	NF EN 12844-1999 Znic and znic alloys-Castings-Specification
Classification	Zinc and Zinc Alloys
Density	6.8 g/cm³

ZP0430 Chemical Element Composition Content (%)

Component	Fe	Si	Ni	Cu	Pb	Al	Sn	Mg	Cd	More
Minimum Value	-	-	-	2.7	-	3.7	-	0.025	-	Zn 余量
Maximum Value	0.05	0.03	0.02	3.3	0.005	4.3	0.002	0.06	0.005	Zn 余量

ZP0430 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Steel: 20°C	355	270	50mm：5	HBS 500-10-30：102	6.3*6.3mm Bar: 59

Approximate Comparison Table Znic and znic alloys castings

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!