ZP0810 ZP8 - NF EN 12844-1999

Grade	ZP0810
Other Names
Corresponding Standard	NF EN 12844-1999 Znic and Znic Alloys-Castings-Specification
Classification	Zinc and Zinc Alloys
Density	6.3 g/cm³

ZP0810 Chemical Element Composition Content (%)

Component	Fe	Si	Ni	Cu	Pb	Al	Sn	Mg	Cd	More
Minimum Value	-	-	-	0.8	-	8	-	0.015	-	Zn 余量
Maximum Value	0.06	0.045	0.02	1.3	0.006	8.8	0.003	0.03	0.006	Zn 余量

ZP0810 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Steel: 20°C	370	220	50mm：8	HBS 500-10-30：100	6.3*6.3mm Bar: 40

Approximate Comparison Table Zinc and Zinc Alloys Castings

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!