P3095- - JIS Z 2550-2000(R2005)

Performance Level	P3095-
Corresponding Standard	JIS Z 2550-2000(R2005) Sintered Metal Materials - Specification
Classification	Special Alloy Steel
Density	6.9 g/cm³

P3095- Chemical Element Composition Content (%)

Component	C	Ni	Cu	Mo	Other Total	More
Minimum Value	0.6	1	1	0.6	-	Fe:余量
Maximum Value	0.9	3	3	0.7	2	Fe:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

P3095- Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Heat Treatment	≥460	≈400	-	HV: ≥170HV5 HR: ≥77HRB

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!