Ti-6Al-4V - SAE AMS 4928W-2017

Grade	Ti-6Al-4V
Corresponding Standard	SAE AMS 4928W-2017 Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6AI - 4V Annealed
Classification	Titanium and Titanium Alloys

Ti-6Al-4V Chemical Element Composition Content (%)

Component	Fe	C	N	V	Al	H ^*	Y	O	Other Individual	Other Total	More
Minimum Value	-	-	-	3.5	5.5	-	-	-	-	-	Ti:余量
Maximum Value	0.3	0.08	0.05	4.5	6.75	0.0125	0.005	0.2	0.1	0.4	Ti:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Ti-6Al-4V Mechanical Properties

diameter or least distance between parallel sides d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
d≤50.8①	Annealing	≥931	≥862	Longitudinal: ≥10 Long transverse: ≥10	Longitudinal: ≥25 Long transverse: ≥20
50.8＜d≤101.6	Annealing	≥896	≥827	Longitudinal: ≥10 Long transverse: ≥10 Short transverse: ≥10	Longitudinal: ≥25 Long transverse: ≥20 Short transverse: ≥15
101.6＜d≤152.4	Annealing	≥896	≥827	Longitudinal: ≥ 10 Long transverse: ≥ 10 Short transverse: ≥ 8	Longitudinal: ≥ 20 Long transverse: ≥ 20 Short transverse: ≥ 15
152.4＜d≤254	Annealing	≥896	≥820	Longitudinal: ≥ 10 Long transverse: ≥ 10 Short transverse: ≥ 8	Longitudinal: ≥ 20 Long transverse: ≥ 20 Short transverse: ≥ 15

Ti-6Al-4V Corresponding Standards(Same grade name, different standards)

1	GB /T 3620.1-2007
	Ti-6Al-4V TC4
2	GB /T 3621-2007
	Ti-6Al-4V TC4
3	GB /T 3620.1-2016
	Ti-6Al-4V TC4
4	GJB 391A-2015
	Ti-6Al-4V TC4
5	GJB 2219-1994
	Ti-6Al-4V TC4
6	SAE AMS 4911R-2019
	Ti-6Al-4V
7	SAE AMS 4928W-2017
	Ti-6Al-4V
8	GB /T 42159-2022
	Ti-6Al-4V TC4

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!