S220GD 1.0241 - EN 10346-2015

Grade	S220GD
European Standard Steel Grade	1.0241
Corresponding Standard	EN 10346-2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
Classification	Carbon Steel

S220GD Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	-	-	-	-	-
Maximum Value	0.2	0.6	1.7	0.1	0.045

S220GD Mechanical Properties

product	Mark	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Hot-dipped steel sheet	S220GD+Z S220GD+ZF S220GD+ZA S220GD+ZM S220GD+AZ	≥300②	≥220	A80: ≥20①

Approximate Comparison Table

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!