S250GD 1.0242 - EN 10346-2015

Grade	S250GD
European Standard Steel Grade	1.0242
Corresponding Standard	EN 10346-2015 Continuously Hot-Dip Coated Steel Flat Products for Cold Forming - Technical Delivery Conditions
Classification	Carbon Steel

S250GD Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	-	-	-	-	-
Maximum Value	0.2	0.6	1.7	0.1	0.045

S250GD Mechanical Properties

product	Mark	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Hot-dipped steel sheet	S250GD+Z S250GD+ZF S250GD+ZA S250GD+ZM S250GD+AZ S250GD+AS	≥330②	≥250	A80: ≥19①

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!