S320GD 1.0250 - EN 10346-2015

Grade	S320GD
European Standard Steel Grade	1.0250
Corresponding Standard	EN 10346-2015 Continuously Hot-Dip Coated Steel Flat Products for Cold Forming - Technical Delivery Conditions
Classification	Carbon Steel

S320GD Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	-	-	-	-	-
Maximum Value	0.2	0.6	1.7	0.1	0.045

S320GD Mechanical Properties

product	Mark	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Hot-dipped steel sheet	S320GD+Z S320GD+ZF S320GD+ZA S320GD+ZM S320GD+AZ S320GD+AS	≥390②	≥320	A80: ≥17①

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!