Grade 42CrMo
China ISC 42CM
Corresponding Standard GB /T 41157.1-2022
Fasteners for nuclear power plants— Part1: Bolts, screws and studs made of alloy steel
Classification Alloy Steel
42CrMo Chemical Element Composition Content (%)
Component C Si Mn P S Cr Mo
Minimum Value 0.38 0.1 0.75 - - 0.8 0.15
Maximum Value 0.48 0.4 1 0.025 0.015 1.15 0.3
42CrMo Mechanical Properties
product Test Temperature Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Reduction of Area
ψ
%
Hardness
HBW
Impact Energy Absorption
KV2
J
Bolts, Screws, Studs Room Temperature 865~1040 ≥722 ≥14 ≥50 HBW: 248~352
HRC: 23~37
HV:253~357
0°C:
≥60 (Level 1); ≥40 (Level 2, 3)
Bolts, Screws, Studs ≥570
1 Approximate Comparison Table Structural Alloy Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
GB ISC CNS JIS KS ASTM/AISI UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade SS14 BS EN/BS
42CrMo A30422 SCM440 SCM440
SCM440H
SCM440 4140
4142
G41400
G41420
42CrMo4 42CrMo4 1.7225 42CD4 42CrMo4 1.7225 2244 708M40
2 Approximate Comparison Table Structural Alloy Steel
China Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB JIS ASTM ISO DIN EN/DIN NF EN/NF EN Numerical Grade GOST SS BS EN/BS
42CrMo SCM440H 4140
4142
42CrMo4 42CrMo4 42CD4 42CrMo4 1.7225 35KHM
38KHM
2244 708M40
CFS11
3 Approximate Comparison Table Structural Alloy Steel
China United States
GB ASTM
42CrMo A193 B7

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!