St 4 1.0338 - DIN 1624-1987 - H2ABC

中文版

Grade	St 4
Germany W-Nr.	1.0338
Corresponding Standard	DIN 1624-1987
Classification	Carbon Steel
Density	7.85 g/cm³

St 4 Chemical Element Composition Content (%)

Component	C	Al ^*
Minimum Value	-	0.02
Maximum Value	0.08	-

St 4 Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t<3	St4 G BK	Annealed G	270~350		≥38③
t≥3	RRSt3 G BK	Annealed G	270~370		≥40④
t<3	RRSt3 LG BK	Lightly Precision Rolled LG	270~350	≤210ⓐ；≤225ⓑ	≥38③
t≥3	RRSt3 LG BK	Lightly Precision Rolled LG	270~350	≤210ⓐ；≤225ⓑ	≥40④
t<3	RRSt3 K32 BK	Cold Precision Rolled K32	290~390	220~325	≥24③
t≥3	RRSt3 K32 BK	Cold Precision Rolled K32	290~390	220~325	≥28④
t<3	RRSt3 K40 BK	Cold Precision Rolled K40	390~490	≥350	≥6③
t≥3	RRSt3 K40 BK	Cold Precision Rolled K40	390~490	≥350	≥14④
All Sizes	RRSt3 K50 BK	Cold Precision Rolling K50	490~590	≥460	-
All Sizes	RRSt3 K60 BK	Cold Precision Rolling K60	590~690	≥560	-

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
SPCE	A619 DDS	Cr04 CR24	RRSt14 St14	1.0338	ES	DC04 FeP04①	1.0338	05kp 08kp 08YU	1147	1CR 1CS 1HR 1HS CR1

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!