St52-3 1.0841 1.0570 - DIN 17100-1980

Grade	St52-3
Other Names
Old Grade
Corresponding Standard	DIN 17100-1980 Steels for General Structural Purposes Quality Standard
Classification	Carbon Steel

St52-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	-	-	-	-	-
Maximum Value	0.2	0.55	1.6	0.04	0.04

①For product thickness t >100mm，C content according to the agreement
②For every 0.005% decrease in P below the specified maximum value, N may be increased by 0.001%. The nitrogen (N) content shall not exceed 0.012% in the ladle analysis and 0.014% in the product analysis.
③The content may not exceed 0.55%Si and 1 .60% Mn in the ladle analysis or 0.60%Si and 1 .70% Mn in the sample analysis.

St52-3 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t＜3	510~680	≥355	12~18
3≤t≤16	490~630	≥355	20~22
16＜t≤40	490~630	≥345	20~22
40＜t≤63	490~630	≥335	19~21
63＜t≤80	490~630	≥325	18~20
80＜t≤100	490~630	≥315	18~20

① Tensile test values apply to longitudinal specimens for steel with a width < 600 mm; for steel with a width ≥ 600 mm, transverse specimens shall be used.
② U=hot-rolled, non-heat-treated; N=normalized.
③ Impact energy absorption: The average of three tests is taken as the test result. The minimum average value is 23 or 27 J, and only one individual value is allowed to be up to 30% below the maximum (average) value.

New and Old Grade Replacement List

Corresponding Standard	Grade
DIN 17100-1980	Grade Old Grade Other Name
DIN EN 10025-2-2019	Grade Germany W-Nr.

1 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	SS	BS EN/BS
Q345B Q345C	SM490A SS490	A572 A678Gr.A SSGrade50	E355C Fe510B	St52-3	E36-2	S355JR Fe510B	1.0045	2132-01	50B

2 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	AISI	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
16Mn	SM490 SM490C SS490C	1024 Gr.50type1-4	Fe510D	St52-3 St52-3N	1.0570	E36-3	S355J2(+N) Fe510D1① S355J2G3①	1.0570(dubl)	17G1S 17GS S345	2135-01	50D 50C

3 Approximate Comparison Table High-Quality Carbon Structural Steel

United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
Gr.65	Fe590	1.0060 E355 St52 St52-3	E335 ES355 TS-47a TU526	E355	1.0580	St6sp	1650	CEW5 CFS5 E335 ERW5NKM ERW5NZF

St52-3 Corresponding Standards(Same grade name, different standards)

1	DIN 17100-1980
	St52-3 (1.0841) 1.0570
2	DIN 1652-2-1990
	St52-3 1.0570
3	Q/BQB 303-2018
	St52-3
4	Q/BQB 130-2003
	St 52-3

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!