St60-2 1.0060 1.0542 - DIN 17100-1980

Grade	St60-2
Germany W-Nr.	1.0060
Old Grade
Corresponding Standard	DIN 17100-1980 Steels for General Structural Purposes Quality Standard
Classification	Carbon Steel

St60-2 Chemical Element Composition Content (%)

Component	P	S	N
Minimum Value	-	-	-
Maximum Value	0.05	0.05	0.009

①For product thickness t >100mm，C content according to the agreement
②For every 0.005% decrease in P below the specified maximum value, N may be increased by 0.001%. The nitrogen (N) content shall not exceed 0.012% in the ladle analysis and 0.014% in the product analysis.
③The content may not exceed 0.55%Si and 1 .60% Mn in the ladle analysis or 0.60%Si and 1 .70% Mn in the sample analysis.

St60-2 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t＜3	590~770	≥335	6~12
3≤t≤16	570~710	≥335	14~16
16＜t≤40	570~710	≥325	14~16
40＜t≤63	570~710	≥315	13~15
63＜t≤80	570~710	≥305	12~14
80＜t≤100	570~710	≥295	12~14

① Tensile test values apply to longitudinal specimens for steel with a width < 600 mm; for steel with a width ≥ 600 mm, transverse specimens shall be used.
② U=hot-rolled, non-heat-treated; N=normalized.
③ Impact energy absorption: The average of three tests is taken as the test result. The minimum average value is 23 or 27 J, and only one individual value is allowed to be up to 30% below the maximum (average) value.

New and Old Grade Replacement List

Corresponding Standard	Grade
DIN 17100-1980	Grade Germany W-Nr. Old Grade
DIN EN 10025-2-2019	Grade Germany W-Nr.

1 Approximate Comparison Table

China	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden
GB	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS
Q345C	FeE690	St60-2	A60-2	E335 Fe590-2①	1.0060	St5ps St5sp St6ps St6sp	1650-00 1650-01

2 Approximate Comparison Table

China	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
GB	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
Q390C	Gr.65	Fe590	E355 St52 St52-3	1.0060	E335 ES355 TS-47a TU526	E355	1.0580	St6sp	1650	CEW5 CFS5 E335 ERW5NKM ERW5NZF

St60-2 Corresponding Standards(Same grade name, different standards)

1	DIN 17100-1980
	St60-2 1.0060 (1.0542)
2	DIN 1652-1963
	St60-2 1.0543
3	DIN 1652-2-1990
	St60-2 1.0060

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!