40EE - BS 4360-1990

Grade	40EE
Corresponding Standard	BS 4360-1990 Weldable Structural Steels
Classification	Carbon Steel
Density	7.85 g/cm³

40EE Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	-	0.1	-	-	-
Maximum Value	0.16	0.5	1.5	0.04	0.03

40EE Mechanical Properties

product	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Thick plate, Coil, Wide flat steel	340~500	t≤16mm: ≥260 16＜t≤40mm: ≥245 40＜t≤63mm: ≥240 63＜t≤100mm: ≥225 100＜t≤150mm: ≥205	标距L0=80mmⓐ: ≥25 标距L0=200mmⓑ: ≥22 标距L0=5.65 √So: ≥25	-50°C: ≥27(t≤75*)

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!