S20100 - ASTM A240/240M-2018

USA UNS	S20100
AISI American Iron and Steel Institute	201
Corresponding Standard	ASTM A240/240M-2018 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and General Applications
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance Weldability

Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	5.5	-	-	16	3.5	-
Maximum Value	0.15	1	7.5	0.06	0.03	18	5.5	0.25

Mechanical Properties

condition	Mark	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Thick plates, thin plates, strip products	201-1 •	≥515	≥260	≥40	≤217
Thick plates, thin plates, strip products	201-2 •	≥655	≥310	≥40	≤241

1 Approximate Comparison Table Austenitic Stainless Steel

China		Taiwan, China	Japan	South Korea	United States		International Organization for Standardization	European Standard
GB	ISC	CNS	JIS	KS	ASTM	UNS	ISO	EN	Numerical Grade
12Cr17Mn6Ni5N (1Cr17Mn6Ni5N)	S35350	201	SUS 201	STS 201	201	S20100	X12CrMnNi 17-7-5 X9CrMnNiCu17-8-5-2	X12CrMnNi 17-7-5 X9CrMnNiCu17-8-5-2	1.4372 1.4618

2 Approximate Comparison Table Austenitic Stainless Steel

China	Japan	United States	International Organization for Standardization		European Standard
ISC	JIS	UNS	ISO	Numerical Grade	Numerical Grade
S35350	SUS201	S20100	X12CrMnNiN17-7-5	4372-201-00-I	1.4372

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!