中文版
Home Material NF EN 10296-2-2005
简体 | 繁體
Grade X2CrNi18-9
1.4307
Corresponding Standard NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Classification Austenitic Stainless Steel
X2CrNi18-9 Chemical Element Composition Content (%)
Component C Si Mn P S ① Cr Ni N
Minimum Value - - - - - 17.5 8 -
Maximum Value 0.03 1 2 0.045 0.015 19.5 10.5 0.11
X2CrNi18-9 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥470 Rp0.2：≥180
Rp1.0：≥215		 l：≥40
t：≥35
X2CrNi18-9 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNi 18-9 1.4307
2 EN 10296-2-2005
X2CrNi18-9 1.4307
3 EN 10253-4-2003
X2CrNi18-9 1.4307
4 EN 10263-5-2001
X2CrNi18-9 1.4307
5 EN 10269-2006
X2CrNi18-9 1.4307
6 EN 10250-4-1999
X2CrNi 18-9 1.4307
7 ISO TS 15510-2003
X2CrNi18-9
8 DIN 17440-1972
X2CrNi 18-9 1.4306 X2CrNi 19-11
9 EN 10088-3-2005
X2CrNi 18-9 1.4307
10 EN 10269-2013
X2CrNi 18-9 1.4307
11 EN 10088-3-2014
X2CrNi 18-9 1.4307
12 ISO 15510-2014
X2CrNi18-9 4307-304-03-I
13 NF EN 10269-1999
X2CrNi18-9 1.4307
14 VDI 2230-1-2015
X2CrNi 18-9 1.4307
15 DIN EN 10263-5-2018
X2CrNi18-9 1.4307
16 DIN EN 10269-2014
X2CrNi 18-9 1.4307
17 ISO 9328-7-2018
X2CrNi18-9
18 DIN EN 10088-3-2014
X2CrNi 18-9 1.4307
19 ISO 683-18-2014
X2CrNi18-9 4307-304-03-1
20 ISO 4954-2018
X2CrNi18-9 4307-304-03-I
21 NF EN 10088-2-2005
X2CrNi18-9 1.4307
22 NF EN 10088-1-2005
X2CrNi18-9 1.4307
23 NF EN 10028-7-2008
X2CrNi18-9 1.4307
24 NF EN 10296-2-2005
X2CrNi18-9 1.4307
25 NF EN 10028-7-2000
X2CrNi18-9 1.4307
26 EN 10263-5-2017
X2CrNi18-9 1.4307
27 ISO 4954-2-2024
X2CrNi18-9 4307-304-03-I
28 DIN EN 10296-2-2006
X2CrNi18-9 1.4307

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!