中文版
Home Material NF EN 10296-2-2005
简体 | 繁體
Grade X6CrNiTi18-10
1.4541
Corresponding Standard NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Classification Austenitic Stainless Steel
X6CrNiTi18-10 Chemical Element Composition Content (%)
Component C Si Mn P S ① Cr Ni More
Minimum Value - - - - - 17 9 Ti:5×C~0.7
Maximum Value 0.08 1 2 0.045 0.015 19 12
X6CrNiTi18-10 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥500 Rp0.2：≥200
Rp1.0：≥235		 l：≥35
t：≥30
X6CrNiTi18-10 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X6CrNiTi 18-10 1.4541
2 EN 10296-2-2005
X6CrNiTi18-10 1.4541
3 EN 10253-4-2003
X6CrNiTi18-10 1.4541
4 EN 10263-5-2001
X6CrNiTi18-10 1.4541
5 EN 10250-4-1999
X6CrNiTi 18-10 1.4541
6 ISO TS 15510-2003
X6CrNiTi18-10
7 EN 10088-2-2005
X6CrNiTi18-10 1.4541
8 EN 10088-3-2005
X6CrNiTi 18-10 1.4541
9 ISO 9327(-5)-1999
X6CrNiTi18-10 (F53)
10 EN 10088-3-2014
X6CrNiTi 18-10 1.4541
11 ISO 15510-2014
X6CrNiTi18-10 4541-321-00-I
12 DIN EN 10263-5-2018
X6CrNiTi18-10 1.4541
13 ISO 9328-7-2018
X6CrNiTi18-10
14 DIN EN 10088-3-2014
X6CrNiTi 18-10 1.4541
15 ISO 683-18-2014
X6CrNiTi18-10 4541-321-00-I
16 ISO 4954-2018
X6CrNiTi18-10 4541-321-00-I
17 NF EN 10088-2-2005
X6CrNiTi18-10 1.4541
18 NF EN 10088-1-2005
X6CrNiTi18-10 1.4541
19 NF EN 10028-7-2008
X6CrNiTi18-10 1.4541
20 NF EN 10296-2-2005
X6CrNiTi18-10 1.4541
21 NF EN 10028-7-2000
X6CrNiTi18-10 1.4541
22 EN 10263-5-2017
X6CrNiTi18-10 1.4541
23 ISO 4954-2-2024
X6CrNiTi18-10 4541-321-00-I
24 DIN EN 10296-2-2006
X6CrNiTi18-10 1.4541

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!