中文版
Home Material NF EN 10296-2-2005
简体 | 繁體
Grade X6CrNiNb18-10
1.4550
Corresponding Standard NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Classification Austenitic Stainless Steel
X6CrNiNb18-10 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni More
Minimum Value - - - - - 17 9 Nb:10×C~1
Maximum Value 0.08 1 2 0.045 0.015 19 12
X6CrNiNb18-10 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥510 Rp0.2：≥205
Rp1.0：≥240		 l：≥35
t：≥30
X6CrNiNb18-10 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X6CrNiNb 18-10 1.4550
2 EN 10296-2-2005
X6CrNiNb18-10 1.4550
3 EN 10253-4-2003
X6CrNiNb18-10 1.4550
4 EN 10250-4-1999
X6CrNiNb 18-10 1.4550
5 ISO TS 15510-2003
X6CrNiNb18-10
6 EN 10088-2-2005
X6CrNiNb18-10 1.4550
7 DIN 17440-1972
X6CrNiNb 18-10 X10CrNiNb 18-9 1.4550
8 EN 10088-3-2005
X6CrNiNb 18-10 1.4550
9 ISO 9327(-5)-1999
X6CrNiNb18-10 (F50)
10 EN 10088-3-2014
X6CrNiNb 18-10 1.4550
11 ISO 15510-2014
X6CrNiNb18-10 4550-347-00-I
12 ISO 9328-7-2018
X6CrNiNb18-10
13 DIN EN 10088-3-2014
X6CrNiNb 18-10 1.4550
14 NF EN 10088-2-2005
X6CrNiNb18-10 1.4550
15 NF EN 10088-1-2005
X6CrNiNb18-10 1.4550
16 NF EN 10028-7-2008
X6CrNiNb18-10 1.4550
17 NF EN 10296-2-2005
X6CrNiNb18-10 1.4550
18 NF EN 10028-7-2000
X6CrNiNb18-10 1.4550
19 DIN EN 10296-2-2006
X6CrNiNb18-10 1.4550

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!