中文版
Home/ Material/ NF EN 10296-2-2005
简体 | 繁體
Grade X2CrNiMo17-12-2
1.4404
Corresponding Standard NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Classification Austenitic Stainless Steel
X2CrNiMo17-12-2 Chemical Element Composition Content (%)
Component C Si Mn P S ① Cr Ni Mo N
Minimum Value - - - - - 16.5 10 2 -
Maximum Value 0.03 1 2 0.045 0.015 18.5 13 2.5 0.11
X2CrNiMo17-12-2 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥490 Rp0.2：≥190
Rp1.0：≥225		 l：≥40
t：≥30
X2CrNiMo17-12-2 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNiMo 17-12-2 1.4404
2 EN 10296-2-2005
X2CrNiMo17-12-2 1.4404
3 EN 10253-4-2003
X2CrNiMo17-12-2 1.4404
4 EN 10263-5-2001
X2CrNiMo17-12-2 1.4404
5 EN 10269-2006
X2CrNiMo17-12-2 1.4404
6 EN 10250-4-1999
X2CrNiMo 17-12-2 1.4404
7 ISO TS 15510-2003
X2CrNiMo17-12-2
8 EN 10088-2-2005
X2CrNiMo17-12-2 1.4404
9 EN 10088-3-2005
X2CrNiMo 17-12-2 1.4404
10 EN 10269-2013
X2CrNiMo 17-12-2 1.4404
11 EN 10088-3-2014
X2CrNiMo 17-12-2 1.4404
12 ISO 15510-2014
X2CrNiMo17-12-2 4404-316-03-I
13 NF EN 10269-1999
X2CrNiMo17-12-2 1.4404
14 DIN EN 10263-5-2018
X2CrNiMo 17-12-2 1.4404
15 DIN EN 10269-2014
X2CrNiMo 17-12-2 1.4404
16 ISO 9328-7-2018
X2CrNiMo17-12-2
17 DIN EN 10088-3-2014
X2CrNiMo 17-12-2 1.4404
18 ISO 683-18-2014
X2CrNiMo17-12-2 4404-316-03-I
19 ISO 4954-2018
X2CrNiMo17-12-2 4404-316-03-I
20 NF EN 10088-2-2005
X2CrNiMo17-12-2 1.4404
21 NF EN 10088-1-2005
X2CrNiMo17-12-2 1.4404
22 NF EN 10028-7-2008
X2CrNiMo17-12-2 1.4404
23 NF EN 10296-2-2005
X2CrNiMo17-12-2 1.4404
24 NF EN 10028-7-2000
X2CrNiMo17-12-2 1.4404
25 EN 10263-5-2017
X2CrNiMo 17-12-2 1.4404
26 ISO 4954-2-2024
X2CrNiMo17-12-2 4404-316-03-I
27 DIN EN 10296-2-2006
X2CrNiMo17-12-2 1.4404

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!