中文版
Home Material NF EN 10296-2-2005
简体 | 繁體
Grade X2CrNiMoN17-13-3
1.4429
Corresponding Standard NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Classification Austenitic Stainless Steel
X2CrNiMoN17-13-3 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - - - - 16.5 11 2.5 0.12
Maximum Value 0.03 1 2 0.045 0.015 18.5 14 3 0.22
X2CrNiMoN17-13-3 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥580 Rp0.2：≥295
Rp1.0：≥330		 l：≥35
t：≥30
X2CrNiMoN17-13-3 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNiMoN 17-13-3 1.4429
2 EN 10296-2-2005
X2CrNiMoN17-13-3 1.4429
3 EN 10253-4-2003
X2CrNiMoN 17-13-3 1.4429
4 EN 10263-5-2001
X2CrNiMoN17-13-3 1.4429
5 EN 10269-2006
X2CrNiMoN17-13-3 1.4429
6 EN 10250-4-1999
X2CrNiMoN 17-13-3 1.4429
7 EN 10088-2-2005
X2CrNiMoN 17-13-3 1.4429
8 DIN 17440-1972
X2CrNiMoN 17-13-3 X2CrNiMoN 18-13 1.4429
9 EN 10088-3-2005
X2CrNiMoN 17-13-3 1.4429
10 EN 10297(2)-2005
X2CrNiMoN 17-13-3 1.4429
11 EN 10269-2013
X2CrNiMoN 17-13-3 1.4429
12 EN 10088-3-2014
X2CrNiMoN 17-13-3 1.4429
13 NF EN 10269-1999
X2CrNiMoN17-13-3 1.4429
14 DIN EN 10263-5-2018
X2CrNiMoN 17-13-3 1.4429
15 DIN EN 10269-2014
X2CrNiMoN 17-13-3 1.4429
16 ISO 9328-7-2018
X2CrNiMoN17-13-3
17 DIN EN 10088-3-2014
X2CrNiMoN 17-13-3 1.4429
18 ISO 4954-2018
X2CrNiMoN17-13-3 4429-316-53-I
19 NF EN 10088-2-2005
X2CrNiMoN17-13-3 1.4429
20 NF EN 10088-1-2005
X2CrNiMoN17-13-3 1.4429
21 NF EN 10028-7-2008
X2CrNiMoN17-13-3 1.4429
22 NF EN 10296-2-2005
X2CrNiMoN17-13-3 1.4429
23 NF EN 10028-7-2000
X2CrNiMoN17-13-3 1.4429
24 EN 10263-5-2017
X2CrNiMoN 17-13-3 1.4429
25 ISO 4954-2-2024
X2CrNiMoN17-13-3 4429-316-53-I
26 DIN EN 10296-2-2006
X2CrNiMoN17-13-3 1.4429

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!