中文版
Home Material NF EN 10296-2-2005
简体 | 繁體
Grade X3CrNiMo17-13-3
1.4436
Corresponding Standard NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Classification Austenitic Stainless Steel
X3CrNiMo17-13-3 Chemical Element Composition Content (%)
Component C Si Mn P S ① Cr Ni Mo N
Minimum Value - - - - - 16.5 10.5 2.5 -
Maximum Value 0.05 1 2 0.045 0.015 18.5 13 3 0.11
X3CrNiMo17-13-3 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥510 Rp0.2：≥205
Rp1.0：≥240		 l：≥40
t：≥30
X3CrNiMo17-13-3 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X3CrNiMo 17-13-3 1.4436
2 EN 10296-2-2005
X3CrNiMo17-13-3 1.4436
3 EN 10253-4-2003
X3CrNiMo17-13-3 1.4436
4 EN 10263-5-2001
X3CrNiMO17-13-3 1.4436
5 EN 10250-4-1999
X3CrNiMo 17-13-3 1.4436
6 EN 10088-2-2005
X3CrNiMo17-13-3 1.4436
7 EN 10088-3-2005
X3CrNiMo 17-13-3 1.4436
8 EN 10297(2)-2005
X3CrNiMo17-13-3 1.4436
9 EN 10088-3-2014
X3CrNiMo17-13-3 1.4436
10 DIN EN 10263-5-2018
X3CrNiMo 17-13-3 1.4436
11 DIN EN 10088-3-2014
X3CrNiMo17-13-3 1.4436
12 ISO 4954-2018
X3CrNiMo17-13-3 4436-316-00-I
13 NF EN 10088-2-2005
X3CrNiMo17-13-3 1.4436
14 NF EN 10088-1-2005
X3CrNiMo17-13-3 1.4436
15 NF EN 10028-7-2008
X3CrNiMo17-13-3 1.4436
16 NF EN 10296-2-2005
X3CrNiMo17-13-3 1.4436
17 NF EN 10028-7-2000
X3CrNiMo17-13-3 1.4436
18 EN 10263-5-2017
X3CrNiMo 17-13-3 1.4436
19 ISO 4954-2-2024
X3CrNiMo17-13-3 4436-316-00-I
20 DIN EN 10296-2-2006
X3CrNiMo17-13-3 1.4436

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!