中文版
Home Material NF EN 10296-2-2005
简体 | 繁體
Grade X2CrNiMo18-14-3
1.4435
Corresponding Standard NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Classification Austenitic Stainless Steel
X2CrNiMo18-14-3 Chemical Element Composition Content (%)
Component C Si Mn P S ① Cr Ni Mo N
Minimum Value - - - - - 17 12.5 2.5 -
Maximum Value 0.03 1 2 0.045 0.015 19 15 3 0.11
X2CrNiMo18-14-3 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥490 Rp0.2：≥190
Rp1.0：≥225		 l：≥40
t：≥35
X2CrNiMo18-14-3 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNiMo 18-14-3 1.4435
2 EN 10253-4-2003
X2CrNiMo18-14-3 1.4435
3 EN 10250-4-1999
X2CrNiMo 18-14-3 1.4435
4 ISO TS 15510-2003
X2CrNiMo18-14-3
5 EN 10088-2-2005
X2CrNiMo18-14-3 1.4435
6 DIN 17440-1972
X2CrNiMo 18-14-3 X2CrNiMo 18-12 1.4435
7 EN 10088-3-2005
X2CrNiMo 18-14-3 1.4435
8 EN 10297(2)-2005
X2CrNiMo18-14-3 1.4435
9 EN 10088-3-2014
X2CrNiMo18-14-3 1.4435
10 ISO 15510-2014
X2CrNiMo18-14-3 4435-316-91-I
11 ISO 9328-7-2018
X2CrNiMo18-14-3
12 DIN EN 10088-3-2014
X2CrNiMo18-14-3 1.4435
13 NF EN 10088-2-2005
X2CrNiMo18-14-3 1.4435
14 NF EN 10088-1-2005
X2CrNiMo18-14-3 1.4435
15 NF EN 10028-7-2008
X2CrNiMo18-14-3 1.4435
16 NF EN 10296-2-2005
X2CrNiMo18-14-3 1.4435
17 NF EN 10028-7-2000
X2CrNiMo18-14-3 1.4435
18 DIN EN 10296-2-2006
X2CrNiMo18-14-3 1.4435
19 EN 10272-2016
X2CrNiMo18-14-3 1.4435

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!