中文版
Home Material NF EN 10296-2-2005
简体 | 繁體
Grade X1NiCrMoCu25-20-5
1.4539
Corresponding Standard NF EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes
Classification Austenitic Stainless Steel
X1NiCrMoCu25-20-5 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu Mo N
Minimum Value - - - - - 19 24 1.2 4 -
Maximum Value 0.02 0.7 2 0.03 0.01 21 26 2 5 0.15
X1NiCrMoCu25-20-5 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥520 Rp0.2：≥220
Rp1.0：≥250		 l：≥35
t：≥30
X1NiCrMoCu25-20-5 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X1NiCrMoCu 25-20-5 1.4539
2 EN 10296-2-2005
X1NiCrMoCu25-20-5 1.4539
3 EN 10253-4-2003
X1NiCrMoCu25-20-5 1.4539
4 EN 10250-4-1999
X1NiCrMoCu 25-20-5 1.4539
5 ISO TS 15510-2003
X1NiCrMoCu25-20-5
6 EN 10088-2-2005
X1NiCrMoCu25-20-5 1.4539
7 EN 10088-3-2005
X1NiCrMoCu 25-20-5 1.4539
8 EN 10088-3-2014
X1NiCrMoCu25-20-5 1.4539
9 ISO 15510-2014
X1NiCrMoCu25-20-5 4539-089-04-I
10 ISO 9328-7-2018
X1NiCrMoCu25-20-5
11 DIN EN 10088-3-2014
X1NiCrMoCu25-20-5 1.4539
12 DIN EN 10270-3-2012
X1NiCrMoCu25- 20-5 1.4539
13 ISO 683-18-2014
X1NiCrMoCu25-20-5 4539-089-04-I
14 NF EN 10088-2-2005
X1NiCrMoCu25-20-5 1.4539
15 NF EN 10088-1-2005
X1NiCrMoCu25-20-5 1.4539
16 NF EN 10028-7-2008
X1NiCrMoCu25-20-5 1.4539
17 NF EN 10296-2-2005
X1NiCrMoCu25-20-5 1.4539
18 NF EN 10028-7-2000
X1NiCrMoCu25-20-5 1.4539
19 DIN EN 10296-2-2006
X1NiCrMoCu25-20-5 1.4539
20 EN 10272-2016
X1NiCrMoCu25-20-5 1.4539

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!