中文版
Home Material NF EN 10296-2-2005
简体 | 繁體
Grade X2CrNiMoN25-7-4
1.4410
Corresponding Standard NF EN 10296-2-2005
Welded Circular Steel Tubes for Mechanical and General Engineering Purposes - Technical Delivery Conditions - Part 2 : Stainless Steel Tubes
Classification Duplex Stainless Steel
X2CrNiMoN25-7-4 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - - - - 24 6 3 0.24
Maximum Value 0.03 1 2 0.035 0.015 26 8 4.5 0.35
X2CrNiMoN25-7-4 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥800 Rp0.2：≥550 l：≥15
X2CrNiMoN25-7-4 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNiMoN 25-7-4 1.4410
2 EN 10296-2-2005
X2CrNiMoN25-7-4 1.4410
3 EN 10253-4-2003
X2CrNiMoN25-7-4 1.4410
4 EN 10250-4-1999
X2CrNiMoN 25-7-4 1.4410
5 ISO TS 15510-2003
X2CrNiMoN25-7-4
6 EN 10088-3-2005
X2CrNiMoN25-7-4 1.4410
7 EN 10088-3-2014
X2CrNiMoN25-7-4 1.4410
8 ISO 15510-2014
X2CrNiMoN25-7-4 4410-327-50-E
9 ISO 9328-7-2018
X2CrNiMoN25-7-4
10 DIN EN 10088-3-2014
X2CrNiMoN25-7-4 1.4410
11 NF EN 10088-2-2005
X2CrNiMoN25-7-4 1.4410
12 NF EN 10088-1-2005
X2CrNiMoN25-7-4 1.4410
13 NF EN 10028-7-2008
X2CrNiMoN25-7-4 1.4410
14 NF EN 10296-2-2005
X2CrNiMoN25-7-4 1.4410
15 NF EN 10028-7-2000
X2CrNiMoN25-7-4 1.4410
16 DIN EN 10296-2-2006
X2CrNiMoN25-7-4 1.4410
17 EN 10272-2016
X2CrNiMoN25-7-4 1.4410

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!