中文版
Home Material NF EN 10296-2-2005
简体 | 繁體
Grade X15CrNiSi20-12
1.4828
Corresponding Standard NF EN 10296-2-2005
Welded Circular Steel Tubes for Mechanical and General Engineering Purposes - Technical Delivery Conditions - Part 2 : Stainless Steel Tubes
Classification Austenitic Stainless Steel
X15CrNiSi20-12 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni N
Minimum Value - 1.5 - - - 19 11 -
Maximum Value 0.2 2.5 2 0.045 0.015 21 13 0.11
X15CrNiSi20-12 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥550 Rp0.2：≥230
Rp1.0：≥270		 l：≥30；t：≥30
X15CrNiSi20-12 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X15CrNiSi 20-12 1.4828
2 ISO 4955-2005
X15CrNiSi20-12
3 EN 10296-2-2005
X15CrNiSi20-12 1.4828
4 EN 10095-1999
X15CrNiSi20-12 1.4828
5 DIN EN 10095-2018
X15CrNiSi20-12 1.4828
6 ISO 4955-1994
X15CrNiSi20-12 (H13)
7 ISO 15510-2014
X15CrNiSi20-12 4828-305-09-I
8 SEW 470(1976)
X15CrNiSi20-12 1.4828
9 ISO 4955-2016
X15CrNiSi20-12 4828-305-09-I
10 EU 95-1979
X15CrNiSi 20-12
11 NF EN 10088-1-2005
X15CrNiSi20-12 1.4828
12 NF EN 10296-2-2005
X15CrNiSi20-12 1.4828
13 DIN EN 10296-2-2006
X15CrNiSi20-12 1.4828

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!