C60S 1.1211 - EN 10132-2021

Grade	C60S
European Standard Steel Grade	1.1211
Corresponding Standard	EN 10132-2021 Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions
Classification	Spring Steel

C60S Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	More
Minimum Value	0.57	0.15	0.6	-	-	-	-	-	-	Cr+Mo+Ni≤0.63
Maximum Value	0.65	0.35	0.9	0.025	0.025	0.4	0.4	0.3	0.1	Cr+Mo+Ni≤0.63

① Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat. All reasonable precautions shall be taken to prevent the addition, from scrap or other material used in manufacture, of such elements which affect the hardenability, mechanical properties and application.

C60S Mechanical Properties

Delivery condition*	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
annealed (+A) or annealed and skin passed(+LC)	≤620	≤495	≥17	HV ≤195
cold rolled(+CR)**	≤1100			HV ≤305
quenched and tempered(QT)***	1150~1750			HV 345~530

• The elongation values in the table are for a gauge length of 80 mm.
• +A=annealed，+LC=annealed and skin passed，+CR=cold rolled，+QT=quenched and tempered

C60S Corresponding Standards(Same grade name, different standards)

1	EN 10132-4-2002
	C60S 1.1211
2	DIN EN 10132-4-2000(+AC:2002)
	C60S 1.1211
3	EN 10132-2021
	C60S 1.1211

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!