360 - ASTM B387-2018

Grade	360
Corresponding Standard	ASTM B387-2018 Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
Classification	Molybdenum and Molybdenum Alloys

360 Chemical Element Composition Content (%)

Component	Fe	C	Si	Ni	N	O	More
Minimum Value	-	-	-	-	-	-	Mo:余量
Maximum Value	0.01	0.03	0.01	0.002	0.002	0.002	Mo:余量

360 Mechanical Properties

diameter	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
0.51＜d ≤ 3.18	SR	≥585	≥450	in 1 in(50mm） ≥15 ①	HV10:- ②
3.18＜d ≤ 10.32	SR	≥515	≥380	≥15	HV10:- ②
10.32＜d ≤ 22.2	SR	≥620	≥515	≥18	HV10:210~280 ②
22.2＜d ≤ 28.6	SR	≥585	≥480	≥15	HV10:210~270 ②
28.6＜d ≤ 47.6	SR	≥515	≥450	≥10	HV10:210~260 ②
47.6＜d ≤ 73	SR	≥480	≥415	≥10	HV10:210~250 ②
73＜d ≤ 88.9	SR	≥450	≥380	≥10	HV10:205~240 ②
d＜50.8	RX	≥415	≥240	≥20	HV10:≤200 ②
50.8 ≤ d ≤ 88.9	RX	≥380	≥170	≥20	HV10:≤200 ②

360 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!