USt37-2 1.0036 1.0112 - DIN 17100-1980

Grade	USt37-2
Germany W-Nr.	1.0036
Old Grade
Corresponding Standard	DIN 17100-1980 Steels for General Structural Purposes Quality Standard
Classification	Carbon Steel
Density	7.85 g/cm³

USt37-2 Chemical Element Composition Content (%)

	Component	C ^①	Si ^③	Mn ^③	P	S	N ^②
厚度t≤16	Minimum Value	-	-	-	-	-	-
厚度t≤16	Maximum Value	0.17	0.55	1.6	0.05	0.05	0.007

	Component	C ^①	Si ^③	Mn ^③	P	S	N ^②
厚度16<t≤100	Minimum Value	-	-	-	-	-	-
厚度16<t≤100	Maximum Value	0.2	0.55	1.6	0.05	0.05	0.007

①For product thickness t >100mm，C content according to the agreement
②For every 0.005% decrease in P below the specified maximum value, N may be increased by 0.001%. The nitrogen (N) content shall not exceed 0.012% in the ladle analysis and 0.014% in the product analysis.
③The content may not exceed 0.55%Si and 1 .60% Mn in the ladle analysis or 0.60%Si and 1 .70% Mn in the sample analysis.

1 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

Russia

Sweden

United Kingdom

ISC

CNS

JIS

ASTM

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

GOST

BS EN/BS

Q235A
Q235B
Q235C
Q235D
(A3)
(C3)

U12352
U12355
U12358
U12359

SS400

SS400
(SS41)

SS400

A570 Gr.A
A570 Gr.D
A283M Gr.D

K02501
K02502

Fe360A
Fe360D

S235JR
S235JRG1
S235JRG2
(St37-2)
(USt37-2)
(RSt37-2)

1.0037
1.0036
1.0038

S235JR
S235JRG1
S235JRG2
(E24-2)
(E24-2NE)

Ст3кп-2
Ст3кп-3
Ст3кп-4
БСт3кп-2

1311
1312

S235JR
S235JRG1
S235JRG2
(40B)
(C)

2 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Japan	United States	International Organization for Standardization	Germany		France	European Standard	Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	GOST	SS	BS EN/BS
Q235 (A3)	SS330 STKM12A	Gr.C	Fe360B	St34-2 USt37-2	1.0028 1.0036	A34-2 S235JRG1	Fe360BFU①	16D 18kp St3kp	1312	CEW2BK Fe360B

USt37-2 Corresponding Standards(Same grade name, different standards)

1	DIN 17100-1980
	USt37-2 1.0036 (1.0112)
2	DIN 1652-2-1990
	USt37-2 1.0036

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!