605M36 - BS 970-3-1991

Grade	605M36
Corresponding Standard	BS 970-3-1991 Specification for wrought steel for machanical and allied engineering purposes part 3:bright bars for general engineering purposes
Classification	Alloy Steel

605M36 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Mo
Minimum Value	0.32	0.1	1.3	-	-	0.22
Maximum Value	0.4	0.4	1.7	0.035	0.04	0.32

• For older grades of stainless steel, see Table 2 of standard BS 970-4-1970

605M36 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
150＜d≤250	605M36R	Quenching and Tempering + Turning or Grinding	700~850	≥495	≥15	201~255	Izod:≥34 KCV:≥28
29<d≤150	605M36R	Quenching and Tempering + Turning or Grinding	700~850	≥525	≥17	201~255	Izod:≥54 KCV:≥50
13<d≤100	605M36S	Quenching and Tempering + Turning or Grinding	775~925	≥585	≥15	223~277	Izod:≥54 KCV:≥50
6≤d≤63	605M36T	Quenching and Tempering + Turning or Grinding	850~1000	≥680	≥13	248~302	Izod:≥54 KCV:≥50
6≤d≤29	605M36U	Quenching and Tempering + Turning or Grinding	925~1075	≥755	≥12	269~331	Izod:≥47 KCV:≥42
6≤d≤19	605M36V	Quenching and Tempering + Turning or Grinding	1000~1150	≥850	≥12	293~352	Izod:≥47 KCV:≥42
29<d≤150	605M36R	Quenching + Tempering + Cold Drawing or Quenching + Tempering + Cold Drawing + Grinding	700~850	≥540	≥12	201~255	Izod:≥54
13<d≤100	605M36S	Quenching + Tempering + Cold Drawing or Quenching + Tempering + Cold Drawing + Grinding	775~925	≥600	≥11	223~277	Izod:≥54
6≤d≤63	605M36T	Quenching + Tempering + Cold Drawing or Quenching + Tempering + Cold Drawing + Grinding	850~1000	≥700	≥9	248~302	Izod:≥54
6≤d≤29	605M36U	Quenching + Tempering + Cold Drawing or Quenching + Tempering + Cold Drawing + Grinding	925~1075	≥770	≥9	269~331	Izod:≥47
6≤d≤19	605M36V	Quenching + Tempering + Cold Drawing or Quenching + Tempering + Cold Drawing + Grinding	1000~1150	≥865	≥9	293~352	Izod:≥47
		Turning, grinding, or cold drawing + softening				≤241

605M36 Corresponding Standards(Same grade name, different standards)

1	BS 970-3-1991
	605M36
2	BS 970-1-1983
	605M36

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!