S460G2+M 1.8887+M - DIN EN 10225-2009 - H2ABC

中文版

Grade	S460G2+M
Germany W-Nr.	1.8887+M
Corresponding Standard	DIN EN 10225-2009 Weldable Structural Steels for Fixed Offshore Structures - Technical Delivery Conditions
Classification	Alloy Steel

S460G2+M Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	As ^*	N	Ti	V	Nb	B	Pb ^*	Al	Sn ^*	Bi ^*	Sb ^*	Ca ^*	More
Minimum Value	-	0.15	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.015	-	-	-	-	Cr+Mo+Ni+Cu≤0.9；Nb+V≤0.09；Nb+V+Ti≤0.11
Maximum Value	0.14	0.55	1.65	0.02	0.007	0.25	0.7	0.3	0.25	0.03	0.01	0.025	0.08	0.04	0.0005	0.01	0.055	0.02	0.01	0.01	0.005	Cr+Mo+Ni+Cu≤0.9；Nb+V≤0.09；Nb+V+Ti≤0.11

S460G2+M Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤16	540~700	≥460	≥17	-40°C: ≥60
16＜t≤25	530~690	≥440	≥17	-40°C: ≥60
25＜t≤40	520~680	≥420	≥17	-40°C: ≥60
40＜t≤63	515~675	≥415	≥17	-40°C: ≥60
63＜t≤80	505~665	≥405	≥17	-40°C: ≥60
80＜t≤100	500~660	≥400	≥17	-40°C: ≥60

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!