QSn6.5-0.1 T51510 - GB /T 14956-1994

Grade	QSn6.5-0.1
China ISC	T51510
Corresponding Standard	GB /T 14956-1994 Special Copper and Copper Alloy Wires
Classification	Copper and Copper Alloys
Properties	Strength Hardness Elasticity Corrosion Resistance Machinability Weldability

QSn6.5-0.1 Chemical Element Composition Content (%)

Component	Fe	P	Pb	Al	Zn	Sn	Other Total	More
Minimum Value	-	0.1	-	-	-	6	-	Cu:余量
Maximum Value	0.05	0.25	0.02	0.002	0.3	7	0.4	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

QSn6.5-0.1 Mechanical Properties

diameter d mm	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
d=0.03	Maximum force Fb: ≥0.245N	≥24
d=0.035	Maximum force Fb: ≥0.345N	≥26
d=0.04	Maximum force Fb: ≥0.53N	≥28
d=0.045	Maximum force Fb: ≥0.635N	≥29
d=0.05	Maximum force Fb: ≥0.805N	≥30
d=0.06	Maximum force Fb: ≥1.18N	≥32
d=0.07	Maximum force Fb: ≥1.62N	≥34

Approximate Comparison Table Bronze

China		United States		International Organization for Standardization		Russia	Sweden
GB	ISC	ASTM	UNS	ISO	Numerical Grade	GOST	SS
QSn6.5-0.1	T51510	94Cu-6Sn-.2P	C51900	CuSn6	C51900	БрОФ6.5-0.15	5428-02 C51900

QSn6.5-0.1 Corresponding Standards(Same grade name, different standards)

1	GB /T 5231-2012
	QSn6.5-0.1 T51510
2	GB /T 5231-2022
	QSn6.5-0.1 T51510
3	YS /T 649-2018
	QSn6.5-0.1 T51510
4	GB /T 14956-1994
	QSn6.5-0.1 T51510
5	GB /T 3114-1994
	QSn6.5-0.1 T51510

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!