A681 Type S5 T41905 - ASTM A681-2008(R2015)

Grade	A681 Type S5
USA UNS	T41905
AISI American Iron and Steel Institute	S5
Corresponding Standard	ASTM A681-2008(R2015) Standard Specification for Tool Steels Alloy
Classification	Tool Steel

A681 Type S5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	V	More
Minimum Value	0.5	1.75	0.6	-	-	0.1	0.2	0.15	Ni+Cu≤0.75
Maximum Value	0.65	2.25	1	0.03	0.03	0.5	1.35	0.35	Ni+Cu≤0.75

A681 Type S5 Mechanical Properties

	Heat Treatment or Condition	Hardness HBW
Bars, thick plates, thin plates, strips, rods, wires, forgings	Cold Drawing	BHN ≤255
Bars, thick plates, thin plates, strips, rods, wires, forgings	Annealing	BHN ≤229
Bars, thick plates, thin plates, strips, rods, wires, forgings	Heat Treatment	HRC ≥58

Approximate Comparison Table Alloy Tool Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!