6082 HE30 - BS 1474-1987

Grade	6082
Old Grade
Corresponding Standard	BS 1474-1987 Wrought Aluminium and Aluminium Alloys for General Engineering Purposes: Bars, Extruded Round Tubes and Sections
Classification	Aluminum and Aluminum Alloys

6082 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	0.7	0.4	-	-	-	-	0.6	-	-	Al:余量
Maximum Value	0.5	1.3	1	0.25	0.1	0.1	0.2	1.2	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

6082 Mechanical Properties

diameter or thickness d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
d≤200	O	≤170		L0=5.65√So: ≥16 L0=50：≥14
d≤200	F	≥110		L0=5.65√So: ≥13 L0=50：≥12
d≤150	T4	≥190	≥120	L0=5.65√So: ≥16 L0=50：≥14
150＜d≤200	T4	≥170	≥100	L0=5.65√So: ≥13
d≤6	T5	≥270	≥230	L0=50：≥8
d≤20	T6，T6510	≥295	≥255	L0=5.65√So: ≥8 L0=50：≥7
20＜d≤150	T6，T6510	≥310	≥270	L0=5.65√So: ≥8
150＜d≤200	T6，T6510	≥280	≥240	L0=5.65√So: ≥5

6082 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	6082
2	DIN 1725-1-1983
	6082 AlMgSi 1 3.2315
3	GB /T 3190-2020
	6082
4	JIS H 4040-2015
	6082 A6082 BE A6082 BD
5	ISO 209-2007
	6082 (AlSi1MgMn)
6	GB /T 3191-2019
	6082
7	BS 1474-1987
	6082 (HE30)
8	GB /T 3880.1-2012
	6082

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!