10кл - GOST 1050-1988

Grade	10кл
Corresponding Standard	GOST 1050-1988 Sized Bars Made Of High-Quality Structural Carbon Steel with A Special Surface Finish
Classification	Carbon Steel
Properties	Weldability Carburizing Ability

10кл Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	As
Minimum Value	0.07	-	0.25	-	-	-	-	-	-
Maximum Value	0.14	0.07	0.5	0.035	0.04	0.15	0.3	0.3	0.08

① Identification numbers for steels (depending on degree of deoxidation) shall be used: kn is for rimmed steel; nc is for semi-killed steel; and identification numbers without letters are for killed steels.
②The nitrogen fraction of total mass in basic oxygen steel shall not exceed 0.006 % for light-gage rolled products and strips and 0.008 % for other types of rolled products.

1 Approximate Comparison Table Cold Heading Steel

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

Russia

United Kingdom

ISC

CNS

JIS

ASTM/AISI

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

GOST

BS EN/BS

ML10

U40102

SWRCH10K

1012

G10120

CC8A
(A2Al)

QSt36-3
(C11C)

1.0214

XC10
FB10
FR10

10кл

0/2

2 Approximate Comparison Table High-Quality Carbon Structural Steel

China		Japan	United States	Germany		France	European Standard		Russia	United Kingdom
GB	ISC	JIS	ASTM	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
10F	U20100	SPHD,SPHE SPH2*	1010	DC01	1.0330	DC01	DC01	1.0330	10КЛ	DC01

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!