CuSn10-C CC480K - DIN EN 1982-1998

Grade	CuSn10-C
Germany W-Nr.	CC480K
Corresponding Standard	DIN EN 1982-1998 Copper and Copper Alloys - Ingots and Castings
Classification	Copper and Copper Alloys

CuSn10-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	P	S	Ni	Cu ^①	Pb	Al	Zn	Sn	Sb
铸件	Minimum Value	-	-	-	-	-	-	88	-	-	-	9	-
铸件	Maximum Value	0.2	0.02	0.1	0.2	0.05	2	90	1	0.01	0.5	11	0.2

CuSn10-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥250	≥130	≥18	≥70
Casting	Permanent Mold Casting GM	≥270	≥160	≥10	≥80
Casting	Centrifugal Casting GZ	≥280	≥160	≥10	≥80
Casting	Continuous Casting GC	≥280	≥170	≥10	≥80

New and Old Grade Replacement List

CuSn10-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!