TA9 Ti-0.2Pd - GB /T 42159-2022

Grade	TA9
Other Names
Corresponding Standard	GB /T 42159-2022 Titanium and titanium alloy bars and wire for fastener
Classification	Titanium and Titanium Alloys

TA9 Chemical Element Composition Content (%)

Component	Fe	C	N	H	O	Pd	Other Individual	Other Total	More
Minimum Value	-	-	-	-	-	0.12	-	-	Ti:余量
Maximum Value	0.3	0.08	0.03	0.015	0.25	0.25	0.1	0.4	Ti:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

TA9 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
2~10	Annealing (M)	≥485	Rp0.2: ≥345 Shear Strength: ≥300	≥18	≥25

Approximate Comparison Table Processing titanium and titanium alloy

China	Japan	United States	International Organization for Standardization	Germany		France	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	BS EN/BS
TA9	Class 13	Grade 7	Ti-Pd0.2(c)	Ti3Pd	3.7255	Ti-Pd0.2(c)	Ti-Pd0.2(c)

TA9 Corresponding Standards(Same grade name, different standards)

1	GB /T 3621-2007
	TA9 Ti-0.2Pd
2	GB /T 3620.1-2016
	TA9 Ti-0.2Pd
3	GB /T 42159-2022
	TA9 Ti-0.2Pd

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!